Return to Snippet

Revision: 49599
at July 26, 2011 06:16 by parkerkrhoyt


Initial Code
#include "WiFly.h"
#include "Credentials.h"

Client client( "ketnerlake.com", 80 );

int looped = 0;

void setup()
{
  Serial.begin( 9600 ); 
  WiFly.begin();
  
  if( !WiFly.join( ssid, passphrase ) ) 
  {
    Serial.println( "Association failed." );
    
    while( 1 ) 
    {
      // Hang on failure.
    }
  }
}

void loop()
{
  String data = "data=$,WEATHER,79.5,51,59.7,29.366,2.8,0.0,270,0.00,0.00,*";
  
  if( client.connect() ) 
  {
    Serial.println( data );

    client.println( "POST /sensors/intercept.cfm HTTP/1.1" );
    client.println( "Host: www.ketnerlake.com" );
    client.println( "Content-Type: application/x-www-form-urlencoded" );
    client.println( "Connection: close" );
    client.print( "Content-Length: " );
    client.println( data.length() );
    client.println();
    client.print( data );
    client.println();
  }
  
  delay( 5000 );
}

Initial URL


Initial Description
This snippet will send an HTTP POST from an Arduino using the WiFly library.  The library is in early alpha, and is a port from the ethernet shield library.  The code here should work with either.  The critical part is the size of the data to send, and the line-breaks in the right places.

Initial Title
HTTP POST from Arduino (WiFly Library)

Initial Tags
http, post

Initial Language
C